Showing posts with label Electricity. Show all posts
Showing posts with label Electricity. Show all posts

Ditch the Batteries

SUBHEAD: Compressed air has longer life expectancy, technical simplicity, lower cost and lower maintenance.

By Kris De Decker on 9 June 2018 for Low Tech Magazine-
(http://www.lowtechmagazine.com/2018/05/ditch-the-batteries-off-the-grid-compressed-air-energy-storage.html)


Image above: Commercial large compressed air storage tanks. From original article.

Going off-grid? Think twice before you invest in a battery system. Compressed air energy storage is the sustainable and resilient alternative to batteries, with much longer life expectancy, lower life cycle costs, technical simplicity, and low maintenance.

Designing a compressed air energy storage system that combines high efficiency with small storage size is not self-explanatory, but a growing number of researchers show that it can be done.

Compressed Air Energy Storage (CAES) is usually regarded as a form of large-scale energy storage, comparable to a pumped hydropower plant. Such a CAES plant compresses air and stores it in an underground cavern, recovering the energy by expanding (or decompressing) the air through a turbine, which runs a generator.

Unfortunately, large-scale CAES plants are very energy inefficient. Compressing and decompressing air introduces energy losses, resulting in an electric-to-electric efficiency of only 40-52%, compared to 70-85% for pumped hydropower plants, and 70-90% for chemical batteries. The low efficiency is mainly since air heats up during compression.

This waste heat, which holds a large share of the energy input, is dumped into the atmosphere. A related problem is that air cools down when it is decompressed, lowering electricity production and possibly freezing the water vapour in the air.

To avoid this, large-scale CAES plants heat the air prior to expansion using natural gas fuel, which further deteriorates the system efficiency and makes renewable energy storage dependent on fossil fuels.

Why Small-scale CAES?

In the previous article, we outlined several ideas – inspired by historical systems – that could improve the efficiency of large-scale CAES plants.

In this article, we focus on the small but growing number of engineers and researchers who think that the future is not in large-scale compressed air energy storage, but rather in small-scale or micro systems, using man-made, aboveground storage vessels instead of underground reservoirs. Such systems could be off-the-grid or grid-connected, either operating by themselves or alongside a battery system.

The main reason to investigate decentralised compressed air energy storage is the simple fact that such a system could be installed anywhere, just like chemical batteries.

Large-scale CAES, on the other hand, is dependent on a suitable underground geology. Although there are more potential sites for large-scale CAES plants than for large-scale pumped hydropower plants, finding appropriate storage caverns is not as easy as was previously assumed. [1-2] [3]

Compared to chemical batteries, micro-CAES systems have some interesting advantages. Most importantly, a distributed network of compressed air energy storage systems would be much more sustainable and environmentally friendly. Over their lifetimes, chemical batteries store only two to ten times the energy needed to manufacture them. [4] Small-scale CAES systems do much better than that, mainly because of their much longer lifespan.
Compared to chemical batteries, a distributed network of compressed air energy storage systems would be much more sustainable and environmentally friendly
Furthermore, they do not require rare or toxic materials, and the hardware is easily recyclable. In addition, decentralised compressed air energy storage doesn’t need high-tech production lines and can be manufactured, installed and maintained by local business, unlike an energy storage system based on chemical batteries.

Finally, micro-CAES has no self-discharge, is tolerant of a wider range of environments, and promises to be cheaper than chemical batteries. [5]

Although the initial investment cost is estimated to be higher than that of a battery system (around $10,000 for a typical residential set-up), and although above-ground storage increases the costs in comparison to underground storage (the storage vessel is good for roughly half of the investment cost), a compressed air energy storage system offers an almost infinite number of charge and discharge cycles. Batteries, on the other hand, need to be replaced every few years, which makes them more expensive in the long run. [5,6]

Challenge: Limiting Storage Size
However, decentralised CAES also faces important challenges. The first is the system efficiency, which is a problem in large- and small-scale systems alike, and the second is the size of the storage vessel, which is especially problematic for small-scale CAES systems.

Both issues make small-scale CAES systems unpractical. Sufficient space for a large storage vessel is not always available, while a low storage efficiency requires a larger solar PV or wind power plant to make up for that loss, raising the costs and lowering the sustainability of the system.

To make matters worse, system efficiency and storage size are inversely related: improving one factor is often at the expense of the other.

Increasing the air pressure minimizes the storage size but decreases the system efficiency, while using a lower pressure makes the system more energy efficient but results in a larger storage size. Some examples help illustrate the problem.

A simulation for a stand-alone CAES aimed at unpowered rural areas, and which is connected to a solar PV system and used for lighting only, operates at a relatively low air pressure of 8 bar and obtains a round-trip efficiency of 60% -- comparable to the efficiency of lead-acid batteries. [7]

However, to store 360 Wh of potential electrical energy, the system requires a storage reservoir of 18 m3, the size of a small room measuring 3x3x2 meters. The authors note that “although the tank size appears very large, it still makes sense for applications in rural areas”.
System efficiency and storage size are inversely related: improving one factor is often at the expense of the other.
Such a system may indeed be beneficial in this context, especially because it has a much longer lifespan than chemical batteries. However, a similar configuration in an urban context with high energy use is obviously problematic.

In another study, it was calculated that it would take a 65 cubic meter air storage tank to store 3 kila-watt hours of energy. This corresponds to a 13 meter long pressure vessel with a diameter of 2.5 meters, shown below. [8]


Image above: Compressed air storage tank 6 feet high by 45 feet long could store 3 kWh of energy. From original article.

Furthermore, average household electricity use per day in industrialised countries is much higher still. For example, in the UK it’s slightly below 13 kWh per day, in the US and Canada it’s more than 30 kWh. In the latter case, ten such air pressure tanks would be required to store one day of electricity use.

Small-scale CAES systems with high pressures give the opposite results. For example, a configuration modeled for a typical household electrical use in Europe (6,400 kWh per year) operates at a pressure of 200 bar (almost 4 times higher than the pressure in large-scale CAES plants) and achieves a storage volume of only 0.55 m3, which is comparable to batteries. However, the electric-to-electric efficiency of this set-up is only 11-17%, depending on the size of the solar PV system. [9]

Two Strategies to Make Micro CAES work
These examples seem to suggest that compressed air energy storage makes no sense as a small-scale energy storage system, even with a reduction in energy demand. However, perhaps surprisingly to many, this is not the case.

Small-scale CAES systems cannot follow the same approach as large-scale CAES systems, which increase storage capacity and overall efficiency by using multi-stage compression with intercooling and multi-stage expansion with reheating.

This method involves additional components and increases the complexity and cost, which is impractical for small-scale systems.

The same goes for “adiabatic” processes (AA-CAES), which aim to use the heat of compression to reheat the expanding air, and which are the main research focus for large-scale CAES. For a micro-CAES system, it’s very important to simplify the structure as much as possible. [5,10]

This leaves us with two low-tech strategies that can be followed to achieve similar storage capacity and energy efficiency as lead-acid batteries. First, we can design low pressure systems which minimize the temperature differences during compression and expansion. Second, we can design high pressure systems in which the heat and cold from compression and expansion are used for household applications.
Small-scale, High Pressure

Small-scale compressed air energy storage systems with high air pressures turn the inefficiency of compression and expansion into an advantage.

While large-scale AA-CAES aims to recover the heat of compression with the aim of maximizing electricity production, these small-scale systems take advantage of the temperature differences to allow trigeneration of electrical, heating and cooling power.

The dissipated heat of compression is used for residential heating and hot water production, while the cold expanding air is used for space cooling and refrigeration. Chemical batteries can’t do this.
Small-scale, high pressure systems use the dissipated heat of compression for residential heating and hot water production, while the cold expanding air is used for space cooling and refrigeration.
In these systems, the electric-to-electric efficiency is very low. However, there are now several efficiencies to define, because the system also supplies heat and cold. [10,11]

Furthermore, this approach can make several electrical appliances unnecessary, such as the refrigerator, the air-conditioning, and the electric boiler for space and water heating. Since the use of these appliances is often responsible for roughly half of the electricity use in an average household, a small-scale CAES system with high pressure has lower electricity demand overall.

High pressure systems easily solve the issue of storage size. As we have seen, a higher air pressure can greatly reduce the size of a compressed air storage vessel, but only at the expense of increased waste heat.

In a small-scale system that takes advantage of temperature differences to provide heating and cooling, this is advantageous.

Therefore, high pressure systems are ideal for small-scale residential buildings, where storage space is limited and where there is a large demand for heat and cold as well as electricity.

The only disadvantages are that high pressure systems require stronger and more expensive storage tanks, and that extra space is required for heat exchangers.


Image above: Experimental set-up of a micro CAES system. From original article, Source [30].

Several research groups have designed, modeled and built small-scale combined heat-and-power CAES units which provide heating and cooling as well as electricity.

The high pressure system with a storage volume of only 0.55 m3 that we mentioned earlier, is an example of this type of system. [9]

As noted, its electrical efficiency is only 11-17%, but the system also produces sufficient heat to produce 270 litres of hot water per day. If this thermal source of energy is also taken into account, the “exergetic” efficiency of the whole system is close to 70%.

Similar "exergy" efficiencies can be found in other studies, with systems operating at pressures between 50 and 200 bar. [11-21]

Heat and cold from compression and expansion can be distributed to heating or cooling devices by means of water or air. The setup of an air cycle heating and cooling system is very similar to a CAES system, except for the storage vessel.

Air cycle heating and cooling has many advantages, including high reliability, ease of maintenance, and the use of a natural refrigerant, which is environmentally benign. [11]

Small-scale, Low Pressure

The second strategy to achieve higher efficiencies and lower storage volumes is exactly the opposite from the first.

Instead of compressing air to a high pressure and taking advantage of the heat and cold from compression and expansion, a second class of small-scale CAES systems is based on low pressures and “near-isothermal” compression and expansion.

Below air pressures of roughly 10 bar, the compression and expansion of air exhibit insignificant temperature changes (“near-isothermal”), and the efficiency of the energy storage system can be close to 100%. There is no waste heat and consequently there is no need to reheat the air upon expansion.

Isothermal compression requires the least amount of energy to compress a given amount of air to a given pressure. However, reaching an isothermal process is far from reality. To start with, it only works with small and/or slowly cycling compressors and expanders. Unfortunately, typical industrial compressors are not made for maximum efficiency but for maximum power and thus work under fast-cycling, non-isothermal conditions. The same goes for most industrial expanders. [22-24]
Below air pressures of 10 bar, compression and expansion of air exhibit insignificant temperature changes and the efficiency can be close to 100%.
The use of industrial compressors and expanders explains in large part why the low pressure CAES systems mentioned at the beginning of this article have such large storage vessels. Both systems are based on devices which are operated outside of their optimal or rated conditions. [25]

Because inefficiencies multiply during energy conversions, even relatively small differences in the efficiency of compressors and expanders can have large effects. For example, a variation in device efficiency from 60% to 80% results in a system efficiency from 36% to 64%, respectively.
New Types of Compressors and Expanders

Because the performance of a compressor and an expander significantly impact the overall efficiency of a small-scale CAES system, several researchers have built their own compressors and expanders, which are especially aimed at energy storage.

For example, one team designed, built and examined a single-stage, low power isothermal compressor that uses a liquid piston. [22]

It operates at a very low compression rate (between 10-60 rpm), which correspond to the output of solar PV panels, and limits temperature fluctuation during compression and expansion to 2 degrees Celsius.

The low-cost device has minimum moving parts and obtains efficiencies of 60-70% at 3 to 7 bar pressure. [22] This is a very high efficiency for such a simple device, considering that a sophisticated three-stage centrifugal compressor, used in large-scale CAES systems or in industrial settings, is roughly 70% efficient.

Furthermore, the researchers state that the efficiency is limited by the off-the-shelf motor that they use to power their compressor. Indeed, another research team achieved 83% efficiency. [26]


Image above: A cutaway view of a modern, quiet, oil free scroll format air compressor. From (http://www.fusheng.com/FSAP/F_ProductInfo?ProductId=Prod_1-11-0&n=GW%20Series%20Oil-free%20Scroll%20Air%20Compressor&r_reg=en-us&rndt=w1tupMXK).

Another novelty is the use of scroll compressors, which are the types of compressors that are now used in refrigerators, air-conditioning systems, and heat pumps. Both fluid piston and scroll compressors have a high area-to-volume ratio, which minimizes heat production, and can easily handle two-phase flow, which means that they can also be used as expanders.

They are also lighter and less noisy than typical reciprocating compressors. [24]
 

Varying Air Pressure
Although compressors and expanders are the most important determinants of system efficiency in small-scale CAES systems, they are not the only ones.

For example, in every compressed air energy storage system, additional efficiency loss is caused by the fact that during expansion the storage reservoir is depleted and therefore the pressure drops. Meanwhile, the input pressure for the expander is required to vary only in a minimal range to assure high efficiency.

This is usually solved in two ways, although neither is really satisfactory. First, air can be stored in a tank with surplus pressure, after which it is throttled down to the required expander input pressure. \

However, this method – which is used in large-scale CAES – requires additional energy use and thus introduces inefficiency.

Second, the expander can operate at variable conditions, but in this case efficiency will drop along with the pressure while the storage is emptied.
During expansion the storage reservoir is depleted and therefore the pressure drops.
With these problems in mind, a team of researchers combined a small-scale CAES with a small-scale pumped hydropower plant, resulting in a system that maintains a steady pressure during the complete discharge of the storage reservoir.

It consists of two compressed air tanks that are connected by a pipe attached to their lower portions: each of these have separate spaces for air (below) and water storage (above).

The configuration maintains a head of water by means of a pump, which consumes 15% of the generated power. However, in spite of this extra energy use, the researchers managed to increase both the efficiency and the energy density of the system. [11]

Off-the-Grid Power Storage

To give an idea of what a combination of the right components can achieve, let’s have a look at a last research project. [27] It concerns a system that is based on a highly efficient, custom-made compressor/expander, which is directly coupled to a DC motor/generator.

Apart from its efficient components, this CAES project also introduces an innovative system configuration. It doesn’t use one large air storage tank, but several smaller ones, which are interconnected and computer-controlled.

The setup consists of the compression/expansion unit coupled to three small (7L) cylinders, previously used as air extinguishers, and operates at low pressure (max 5 bar). The storage vessels are connected via PVC pipework and brass fittings.

To control the air-flow, three computer-controlled air valves are installed at the inlet of each cylinder. The system can be extended by adding more pressure vessels. [27]


Image above: A modular system of multiple compressor tanks has multiple advantages. From original article.

A modular configuration results in a higher system efficiency and energy density for mainly two reasons.

First, it helps more effective heat transfer to take place, because every air tank acts as an additional heat exchanger.
 
Second, it allows better control over the discharge rate of the storage reservoir.

The cylinders can be discharged either in unison to satisfy a demand for high power density (more power at the cost of a shorter discharge time), or they can be discharged sequentially to satisfy a demand for high energy density (longer discharge time at the cost of maximum power).
By discharging modular storage cylinders sequentially, the discharge time can be greatly increased, making the system comparable to lead-acid batteries in terms of energy density.
By discharging the cylinders sequentially, the discharge time can be greatly increased, making the system comparable to lead-acid batteries in terms of energy density. Based on their experimental set-up, the researchers calculated the efficiencies for different starting pressures and numbers of cylinders.

They found that 57 interconnected cylinders of 10 litre each, operating at 5 bar, could fulfill the job of four 24V batteries for 20 consecutive hours, all while having a surprisingly small footprint of just 0.6 m3.

Interestingly, the storage capacity is 410 Wh, which is comparable to the 360 Wh rural system noted earlier, which requires an 18 m3 storage vessel – that’s thirty times larger than the modular storage system.

The electric-to-electric efficiency for the 3-cylinder set-up reached a peak of 85% at 3 bar pressure, while the estimated efficiency for the 57-cylinder set-up is 75%.

These are values comparable to lithium-ion batteries, but adding more storage vessels or operating at higher pressures introduces larger losses due to compression, heat, friction and fittings. [27-29]

Nevertheless, when I e-mailed Abdul Alami, the main author of the study, thinking that the results sounded too good to be true, he told me that the figures were actually overly conservative: “We stuck to low pressures to achieve near-isothermal compression and to ensure safe operation.

Operating at pressures higher than 10 bar would create serious thermal losses, but a pressure of 7-8 bar may be beneficial in terms of energy and power density, though maybe not in terms of efficiency.”

Build it Yourself?


In conclusion, small-scale compressed air energy storage could be a promising alternative to batteries, but the research is still in its early stages – the first study on small-scale CAES was published in 2010 – and new ideas will continue to shed light on how best to develop the technology.

At the moment, there are no commercial products available, and setting up your own system can be quite intimidating if you are new to pneumatics.

Simply getting hold of the right components and fittings is a headache, as these come in a bewildering variety and are only sold to industries.

However, if you’re patient and not too unhandy, and if you are determined to use a more sustainable energy storage system, it is perfectly possible to build your own CAES system. As the examples in this article have shown, it’s just a bit harder to build a good one.

There's more ideas for small-scale CAES systems in the previous article: History and Future of the Compressed Air Economy.

References & Notes
[1] Luo, Xing, et al. "Overview of current development in electrical energy storage technologies and the application potential in power system operation." Applied Energy 137 (2015): 511-536. https://www.sciencedirect.com/science/article/pii/S0306261914010290

[2] Laijun, C. H. E. N., et al. "Review and prospect of compressed air energy storage system." Journal of Modern Power Systems and Clean Energy 4.4 (2016): 529-541. https://link.springer.com/article/10.1007/s40565-016-0240-5

[3] There is increasing competition for potential CAES geologic units, as many are also well suited to the storage of natural gas or sequestered carbon. Furthermore, cavern storage imposes harsh requirements on the geographical conditions. For example, the originally planned Iowa CAES project in the US was terminated due to its porous sandstone condition. [2]

[4] Barnhart, Charles J., and Sally M. Benson. "On the importance of reducing the energetic and material demands of electrical energy storage." Energy & Environmental Science 6.4 (2013): 1083-1092. https://gcep.stanford.edu/pdfs/EES_reducingdemandsonenergystorage.pdf

[5] Petrov, Miroslav P., Reza Arghandeh, and Robert Broadwater. "Concept and application of distributed compressed air energy storage systems integrated in utility networks." ASME 2013 Power Conference. American Society of Mechanical Engineers, 2013. http://eddism.com/wp-content/uploads/2014/10/Paper-EDD-Concept-and-Application-of-Distributed-Compressed-Air-Energy-Storage-Systems-Integrated-in-Utility-Networks-July-2013.pdf

[6] Tallini, Alessandro, Andrea Vallati, and Luca Cedola. "Applications of micro-CAES systems: energy and economic analysis." Energy Procedia 82 (2015): 797-804.

[7] Setiawan, A., et al. "Sizing compressed-air energy storage tanks for solar home systems." Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA), 2015 IEEE International Conference on. IEEE, 2015. https://www.researchgate.net/profile/Ardyono_Priyadi/publication/274898992_Sizing_Compressed-Air_Energy_Storage_Tanks_for_Solar_Home_Systems/links/5670e2c408ae2b1f87acf927.pdf

[8] Herriman, Kayne. "Small compressed air energy storage systems." (2013). https://eprints.usq.edu.au/24651/1/Herriman_2013.pdf

[9] Manfrida, Giampaolo, and Riccardo Secchi. "Performance prediction of a small-size adiabatic compressed air energy storage system." International Journal of Thermodynamics 18.2 (2015): 111-119. http://dergipark.ulakbim.gov.tr/eoguijt/article/download/5000071710/5000113411

[10] Kim, Y. M., and Daniel Favrat. "Energy and exergy analysis of a micro-compressed air energy storage and air cycle heating and cooling system." Energy 35.1 (2010): 213-220.

[11] Kim, Young Min. "Novel concepts of compressed air energy storage and thermo-electric energy storage." (2012). https://infoscience.epfl.ch/record/181540/files/EPFL_TH5525.pdf

[12] Inder, Shane D., and Mehrdad Khamooshi. "Energy Efficiency Analysis of Discharge Modes of an Adiabatic Compressed Air Energy Storage System." World Academy of Science, Engineering and Technology, International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering 11.12 (2017): 1101-1109.

[13] Vollaro, Roberto De Lieto, et al. "Energy and thermodynamical study of a small innovative compressed air energy storage system (micro-CAES)." Energy Procedia 82 (2015): 645-651.

[14] Li, Yongliang, et al. "A trigeneration system based on compressed air and thermal energy storage." Applied Energy 99 (2012): 316-323. https://www.sciencedirect.com/science/article/pii/S0306261912003479

[15] Facci, Andrea L., et al. "Trigenerative micro compressed air energy storage: Concept and thermodynamic assessment." Applied energy 158 (2015): 243-254. https://www.sciencedirect.com/science/article/pii/S0306261915009526

[16] Mohammadi, Amin, et al. "Exergy analysis of a Combined Cooling, Heating and Power system integrated with wind turbine and compressed air energy storage system." Energy Conversion and Management 131 (2017): 69-78. https://www.sciencedirect.com/science/article/pii/S0306261915009526

[17] Yao, Erren, et al. "Thermo-economic optimization of a combined cooling, heating and power system based on small-scale compressed air energy storage." Energy Conversion and Management 118 (2016): 377-386. https://www.sciencedirect.com/science/article/pii/S0196890416302229

[18] Liu, Jin-Long, and Jian-Hua Wang. "Thermodynamic analysis of a novel tri-generation system based on compressed air energy storage and pneumatic motor." Energy 91 (2015): 420-429. https://www.sciencedirect.com/science/article/pii/S0360544215011317

[19] Lv, Song, et al. "Modelling and analysis of a novel compressed air energy storage system for trigeneration based on electrical energy peak load shifting." Energy Conversion and Management 135 (2017): 394-401. https://www.sciencedirect.com/science/article/pii/S0196890416311839

[20] Besharat, M. O. H. S. E. N., SANDRA C. Martins, and HELENA M. Ramos. "Evaluation of Energy Recovery in Compressed Air Energy Storage (CAES) Systems." 3rd IAHR Europe Congress. Book of Proceedings, Portugal. 2014. https://www.researchgate.net/profile/Mohsen_Besharat2/publication/270896130_Evaluation_of_Energy_Recovery_in_Compressed_Air_Energy_Storage_CAES_Systems/links/58a1fce0a6fdccf5e97109b2/Evaluation-of-Energy-Recovery-in-Compressed-Air-Energy-Storage-CAES-Systems.pdf

[21] Minutillo, M., A. Lubrano Lavadera, and E. Jannelli. "Assessment of design and operating parameters for a small compressed air energy storage system integrated with a stand-alone renewable power plant." Journal of Energy Storage 4 (2015): 135-144. https://www.sciencedirect.com/science/article/pii/S2352152X15300207

[22] Villela, Dominique, et al. "Compressed-air energy storage systems for stand-alone off-grid photovoltaic modules." Photovoltaic Specialists Conference (PVSC), 2010 35th IEEE. IEEE, 2010. https://pdfs.semanticscholar.org/9f1d/4273f8deb4a0a18c86eb4056e2fd378f8f3f.pdf

[23] Paloheimo, H., and M. Omidiora. "A feasibility study on Compressed Air Energy Storage system for portable electrical and electronic devices." Clean Electrical Power, 2009 International Conference on. IEEE, 2009. https://www.researchgate.net/profile/Michael_Omidiora/publication/224581292_A_Feasibility_Study_on_Compressed_Air_Energy_Storage_System_for_Portable_Electrical_and_Electronic_Devices/links/5640d5d308aebaaea1f6ad44.pdf 

[24] Prinsen, Thomas H. Design and analysis of a solar-powered compressed air energy storage system. Naval Postgraduate School Monterey United States, 2016. https://scholar.google.com/scholar?cluster=5783353621699682542&hl=nl&as_sdt=2005&sciodt=0,5

[25] The small-scale system aimed at urban environments, which has a storage reservoir of 18 metres long, is based on a compressor that “had been in service for 30 years on building sites to run various air tools and had little maintenance done”. [8] This is detrimental to system efficiency, because a compressor that is not maintained well easily wastes as much as 30% of its potential output through air leaks, increased friction, or dirty air filters. This small-scale system also used a highly inefficient expander. All together, this explains why it combines a very large storage volume with a very low electric-to-electric efficiency (less than 5%).

[26] Van de Ven, James D., and Perry Y. Li. "Liquid piston gas compression." Applied Energy 86.10 (2009): 2183-2191. https://experts.umn.edu/en/publications/liquid-piston-gas-compression

[27] Alami, Abdul Hai, et al. "Low pressure, modular compressed air energy storage (CAES) system for wind energy storage applications." Renewable Energy 106 (2017): 201-211.

[28] Alami, Abdul Hai. "Experimental assessment of compressed air energy storage (CAES) system and buoyancy work energy storage (BWES) as cellular wind energy storage options." Journal of Energy Storage 1 (2015): 38-43.

[29] Abdul Alami, e-mail conversation.

[30] Sun, Hao, Xing Luo, and Jihong Wang. "Feasibility study of a hybrid wind turbine system–Integration with compressed air energy storage." Applied Energy 137 (2015): 617 -628. https://www.sciencedirect.com/science/article/pii/S0306261914006680

See also:
Ea O Ka Aina: How much energy do we need? 1/8/18
Ea O Ka Aina: Run the Economy on the Weather 9/28/17
Ea O Ka Aina: How (not) to run on renewables 9/15/17
Ea O Ka Aina: Office Equipment Revolution 2/16/17
Ea O Ka Aina: The curse of the modern office 11/22/16
Ea O Ka Aina: The Return of DC Power 4/27/16
Ea O Ka Aina: Build a local low-tech internet 10/26/15
Ea O Ka Aina: Getting off the grid 5/17/16
Ea O Ka Aina: How Sustainable is Stored Sunlight? 5/14/15
Ea O Ka Aina: How sustainable is PV power? 4/26/15
Ea O Ka Aina: Efficency of well tended fires 7/1/14
Ea O Ka Aina: High Speed Train Disservice 12/16/13
Ea O Ka Aina: European Cargo Bike 9/19/12
Ea O Ka Aina: The Chinese Wheelbarrow 1/4/12
Ea O Ka Aina: In the World After Abundance 6/2/11
Ea O Ka Aina: Wood burning cars 5/27/10
Ea O Ka Aina: Reduce burning fossil fuel! 11/19/09
.

Dimming Bulb: Collapse has arrived!

SUBHEAD: Third of the series examining the implications ten years after Peak Oil. 

By RE on 4 June 2017 for Doomstead Diner -
(http://www.doomsteaddiner.net/blog/2017/06/04/dimming-bulb-3-collapse-has-arrived/)


Image above: See the lights, while you can, with a deluxe Las Vegas helicopter night flight with VIP Transportation. From (http://www.5starhelicoptertours.com/agent/las-vegas-night-strip-helicopter-flight/).

Due to my High & Mighty position as a Global Collapse Pundit, I am often asked the question of when precisely will Collapse arrive?  The people who ask me this question all come from 1st World countries.  They are also all reasonably well off with a computer, an internet connection, running water and enough food to eat.

While a few of us are relatively poor retirees, even none of us wants for the basics as of yet.  The Diner doesn't get many readers from the underclass even here in Amerika, much less from the Global Underclass in places like Nigeria, Somalia,Sudan and Yemen.

The fact is, that for more than half the world population, Collapse is in full swing and well underway.  Two key bellweathers of where collapse is now are the areas of Electricity and Food.

In his seminal 1996 paper The Olduvai Theory: Sliding Towards a Post-Industrial Stone Age, Richard Duncan mapped out the trajectory of where we would be as the years passed and fossil fuels became more difficult and expensive to mine up.

Besides powering all our cars and trucks for Happy Motoring and Just-in-Time delivery, the main thing our 1st World lifestyle requires is Electricity, and lots of it on demand, 24/7.

Although electricity can be produced in some "renewable" ways that don't depend on a lot of fossil fuel energy at least directly, most of the global supply of electric power comes from Coal and Natural Gas.

Of the two, Natural Gas is slightly cleaner, but either way when you burn them, CO2 goes up in the atmosphere.  This of course is a problem climatically, but you have an even bigger problem socially and politically if you aren't burning them.

Everything in the society as it has been constructed since Edison invented the Light Bulb in 1879 has depended on electricity to function.

Now, if all the toys like lights, refrigerators big screen TVs etc had been kept to just a few small countries and the rest of the world lived a simple subsistence farming lifestyle, the lucky few with the toys probably could have kept the juice flowing a lot longer.

Unfortunately however, once exposed to all the great toys, EVERYBODY wanted them.  The industrialists also salivated over all the profit to be made selling the toys to everyone.

So, everybody everywhere needed a grid, which the industrialists and their associated banksters extended Credit for "backward" Nation-States all over the globe to build their own power plants and string their own wires.

Now everybody in the country could have a lightbulb to see by and a fridge to keep the food cold.

More than that, the electricity also went to power water pumping stations and sewage treatment plants, so you could pack the Big Shities with even more people who use still more electricity.

This went on all over the globe, until today there isn't a major city or even a medium size town anywhere on the globe that isn't wired for electricity, although many places that are now no longer have enough money to keep the juice flowing.

Where is the electricity going off first? Obviously, in the poorest and most war torn countries across the Middle East and Africa. These days, from Egypt to Tunisia, if they get two hours of electricity a day they are doing good.


Image above: Young men walk a darkened street in the Middle East. From article below.

Robin Wright wrote a piece for the New Yorker titled "The Lights Are Going Out in the Middle East". She pointed out:
Public fury over rampant outages has sparked protests. In January, in one of the largest demonstrations since Hamas took control in Gaza a decade ago, ten thousand Palestinians, angered by the lack of power during a frigid winter, hurled stones and set tires ablaze outside the electricity company.

Iraq has the world’s fifth-largest oil reserves, but, during the past two years, repeated anti-government demonstrations have erupted over blackouts that are rarely announced in advance and are of indefinite duration.

It’s one issue that unites fractious Sunnis in the west, Shiites in the arid south, and Kurds in the mountainous north. In the midst of Yemen’s complex war, hundreds dared to take to the streets of Aden in February to protest prolonged outages.

In Syria, supporters of President Bashar al-Assad in Latakia, the dynasty’s main stronghold, who had remained loyal for six years of civil war, drew the line over electricity. They staged a protest in January over a cutback to only one hour of power a day.

Over the past eight months, I’ve been struck by people talking less about the prospects of peace, the dangers of ISIS, or President Trump’s intentions in the Middle East than their own exhaustion from the trials of daily life.

Families recounted groggily getting up in the middle of the night when power abruptly comes on in order to do laundry, carry out business transactions on computers, charge phones, or just bathe and flush toilets, until electricity, just as unpredictably, goes off again.
Some families have stopped taking elevators; their terrified children have been stuck too often between floors. Students complained of freezing classrooms in winter, trying to study or write papers without computers, and reading at night by candlelight. The challenges will soon increase with the demands for power—and air-conditioning—surge, as summer temperatures reach a hundred and twenty-five degrees.

The reasons for these outages vary. With the exception of the Gulf states, infrastructure is old or inadequate in many of the twenty-three Arab countries. The region’s disparate wars, past and present, have damaged or destroyed electrical grids.

Some governments, even in Iraq, can’t afford the cost of fueling plants around the clock. Epic corruption has compounded physical challenges. Politicians have delayed or prevented solutions if their cronies don’t get contracts to fuel, maintain, or build power plants.
Now you'll note that at the end of the last paragraph there, the journalist implies that a big part of the problem is "political corruption", but it's really not.  It's simply a lack of money.  These countries at one time were all Oil Exporters, although not on the scale of Saudi Arabia or Kuwait.

As their own supplies of oil have depleted they have become oil importers, except they neither have a sufficient mercantilist model running to bring in enough FOREX to buy oil, and they can't get credit from the international banking cartel to keep buying.

Third World countries are being cut off from the Credit Lifeline, unlike the core countries at the center of credit creation like Britain, Germany and the FSoA.  All these 1st World countries are in just as bad fiscal deficit as the MENA countries, the only difference is they still can get credit and run the deficits even higher.  This works until it doesn't anymore.

Beyond the credit issue is the War problem.  As the countries run out of money, more people become unemployed, biznesses go bankrupt, tax collection drops off the map and goobermint employees are laid off too.  It's the classic deflationary spiral which printing more money doesn't solve, since the notes become increasingly worthless.

For them to be worth anything in FOREX, somebody has to buy their Goobermint Bonds, and that is precisely what is not happening.  So as the society becomes increasingly impoverished, it descends into internecine warfare between factions trying to hold on to or increase their share of the ever shrinking pie.

The warfare ongoing in these nations has knock on effects for the First World Nations still trying to extract energy from some of these places.  To keep the oil flowing outward, they have to run very expensive military operations to at least maintain enough order that oil pipelines aren't sabotaged on a daily basis.

The cost of the operations keeps going up, but the amount of money they can charge the customers for the oil inside their own countries does not keep going up.

Right now they have hit a ceiling around $50/bbl for what they can charge for the oil, and for the most part this is not a profit making price.

So all the corporations involved in Exploration & Production these days are surviving on further extensions of credit from the TBTF banks while at the same time cutting back on their capital expenditures.  This also is a paradigm that can't last.

The other major problem now surfacing is the Food Distribution problem, and again this is hitting the African countries first and hardest.  It's a combination problem of climate change, population overshoot and the warfare which results from those issues.

Currently, the UN lists four countries in extreme danger of famine in the coming year, Nigeria, Sudan, Somalia and Yemen.  They estimate currently there are twenty million people at extreme risk, and I would bet the numbers are a good deal higher than that.


Image above: A child is fed a special formula by her mother at a hospital in Baidoa, Somalia, where drought is causing severe malnourishment. From article below.

Bethan McKernan wrote a piece for the New Independent titled "World faces four famines as Trump plans to slash foreign aid". She pointed out:
This is the iggest humanitarian crisis since World War II' about to engulf 20 million people, UN says, as governments only donate 10 per cent of funds needed for essential aid.

The world is facing a humanitarian crisis bigger than any in living memory, the UN has said, as four countries teeter on the brink of famine.

Twenty million people are at risk of starvation and facing water shortages in Somalia, Nigeria and Yemen, while parts of South Sudan are already officially suffering from famine.  

While the UN said in February that at least $4.4 billion was needed by the end of March to avert a hunger catastrophe across the four nations, the end of the month is fast approaching, and only 10 per cent of the necessary funds have been received from donor governments so far.
It doesn't look too promising that the UN will be able to raise the $4 billion they say is necessary to feed all those hungry mouths, and none of the 1st World countries is too predisposed to handing out food aid when they all currently have problems with their own social welfare programs for food distribution.  Here in the FSoA, there are currently around 45 million people on SNAP Cards at a current cost around $71billion.

The Republicans in charge of Congress will no doubt try to cut this number in order to better fund the Pentagon, but they are not likely to send more money to Somalia.

Far as compassion for all the starving people globally goes in the general population, this also appears to be decreasing, although I don't have statistics to back that up. It is just a general sense I get as I read the collapse blogosphere, in the commentariats generally.

The general attitude is, "It's their own fault for being so stupid and not using Birth Control.  If they were never born, they wouldn't have to die of starvation."  Since they are mostly Black Africans currently starving, this is another reason a large swath of the white population here doesn't care much about the problem.

There are all sorts of social and economic reasons why this problem spiralled out of control, having mainly to do with the production of cheap food through Industrial Agriculture and Endless Greed centered on the idea of Endless Growth, which is not possible on a Finite Planet.

More places on Earth were wired up with each passing year, and more people were bred up with each passing year.  The dependency on fossil fuels to keep this supposedly endless cycle of growth going became ever greater each year, all while this resource was being depleted more each year.

Eventually, an inflexion point had to be hit, and we have hit it.

The thing is, for the relatively comfortable readers of the Doomstead Diner in the First World "Business as Usual" seems to be continuing onward, even if you are a bit poorer than you were last year.

Electricity is still available 24/7 from the grid with only occasional interruptions.  Gas is still available at the pump, and if you are employed you probably can afford to buy it, although you need to be more careful about how much you drive around unless you are a 1%er.

The Rich are still lining up to buy EVs from Elon Musk, even though having a grid to support all electric transportation is out of the question.  The current grid can't be maintained, and upgrading to handle that much throughput would take much thicker cables all across the network.

People carry on though as though this will all go on forever and Scientists & Engineers will solve all the problems with some magical new device.  In other words they believe in Skittle Shitting Unicorns.

That's not going to happen though, so you're back to the question of how long will it take your neighborhood in the England or Germany or America to look like say Egypt does today?  Well, if you go back in time a decade to Egypt in 2007, things were still looking pretty peachy over there, especially in Tourist Traps like Cairo.

Terrorism wasn't too huge a problem and the government of Hosni Mubarak appeared stable.  A decade later today, Egypt is basically a failed state only doing marginally better than places like Somalia and Sudan.  The only reason they're doing as well as they are is because they are in an important strategic location on the Suez Canal and as such get support from the American military.

So a good wild ass guess for how long it will take for the Collapse Level in First World countries to reach the level Egypt is at today is about a decade.

It could be a little shorter, it could be longer.  By then of course, Egypt will be in even WORSE shape, and who might still be left alive in Somalia is an open question.  Highly unlikely to be very many people though.

Over the next decade, the famines will spread and people will die, in numbers far exceeding the twenty million to occur over the next year.  After a while, it's unlikely we will get much reporting about this, and people here won't care much about what they do hear.  They will have their own problems.

See also:
Doomstead Diner: The Dimming Bulb 12/7/14
Doomstead Diner: The Dimming Bulb: Peak Electricity 10/18/15
Ea O Ka Aina: Living through economic collapse 8/28/16


.

The future will be battery powered

SUBHEAD: New battery technologies are pushing ahead, quietly and without much fanfare. 

ByAmeria Urray on 21 March 2017 for Grist Magazine -
(http://grist.org/climate-energy/the-future-will-be-battery-powered/)


Image above: Illustration of a common 1.5volt appliance battery. From original article.

The battery might be the least sexy piece of technology ever invented. The lack of glamour is especially conspicuous on the lower floors of MIT’s materials science department, where one lab devoted to building and testing the next world-changing energy storage device could easily be mistaken for a storage closet.

At the back of the cramped room, Donald Sadoway, a silver-haired electrochemist in a trim black-striped suit and expensive-looking shoes, rummages through a plastic tub of parts like a kid in search of a particular Lego. He sets a pair of objects on the table, each about the size and shape of a can of soup with all the inherent drama of a paperweight.

No wonder it’s so hard to get anyone excited about batteries. But these paperweights — er, battery cells — could be the technology that revolutionizes our energy system.

Because batteries aren’t just boring. Frankly, they kinda suck. At best, the batteries that power our daily lives are merely invisible — easily drained reservoirs of power packed into smartphones and computers and cars.

At worst, they are expensive, heavy, combustible, complicated to dispose of properly, and prone to dying in the cold or oozing corrosive fluid. Even as the devices they power become slimmer and smarter, batteries are still waiting for their next upgrade.

Computer processors famously double their capacity every two years; batteries may scrounge only a few percentage points of improvement in the same amount of time.

Nevertheless, the future will be battery-powered. It has to be. From electric cars to industrial-scale solar farms, batteries are the key to a cleaner, more efficient energy system — and the sooner we get there, the sooner we can stop contributing to potentially catastrophic climate change.

But the batteries we’ve got — mostly lithium-ion — aren’t good enough. There’s been some progress: The cost of storing energy has fallen by half over the last five years, and big companies are increasingly making marquee investments in the technology, like Tesla’s ‘gigafactory.’

 
Image above: Chart of reduction in cost of batteries (including those for electric cars.  From original article and (https://www.bloomberg.com/news/articles/2017-01-30/tesla-s-battery-revolution-just-reached-critical-mass).

But in terms of wholesale economic transformation, lithium-ion batteries remain too expensive. They are powerful in our devices, but when you scale them up they are liable to overheat and even, occasionally, explode.

Perhaps the biggest problem with lithium-ion batteries is that they wear out. Think of your phone battery after it’s spent a few years draining to 1 percent then charging back up to 100. That kind of deep discharge and recharge takes a physical toll and damages a battery’s performance over time.

 So we’re overdue for a brand new battery, and researchers around the world are racing to give us one, with competing approaches and technologies vying for top spot.

Some of their ideas are like nothing we’ve ever plugged into the grid — still not sexy, exactly, but definitely surprising. Liquid batteries. Batteries of molten metal that run as hot as a car engine. Batteries whose secret ingredient is saltwater.

It’s all part of a brand new space race — if less flashy than, you know, outer space.

Just add batteries

There are a few things you want in a good battery, but two are essential: It needs to be reliable, and it needs to be cheap.

“The biggest problem is still cost,” says Eric Rohlfing, deputy director of technology for ARPA-E, a division of the Department of Energy that identifies and funds cutting-edge research and development.

A 2012 study in Nature found that the average American would only be willing to pay about $13 more each month to ensure that the entire U.S. electrical supply ran on renewables. So batteries can’t add much to electrical bills.

For utilities, that means providing grid-level energy storage that would cost them less than $100 per kilowatt hour. Since it was established by President Obama in 2009, ARPA-E has put $85 million toward developing new batteries that can meet that goal.

“People called us crazy,” says Rohlfing. That number was absurdly low for an industry that hadn’t yet seen the near side of $700 per kilowatt hours when they started, according to one study of electric vehicle batteries published in Nature.

Now, though still unattained, $100 per kWh is the standard target across the industry, Rohlfing says. Get below that, it seems, and you can not only compete — you can win.

And here’s what a better battery stands to win: a cleaner, more reliable power system, which doesn’t rely on fossil fuels and is more robust to boot.

Every time you flip a light switch, you tap into a gigantic invisible web, the electrical grid. Somewhere, at the other end of the high-voltage transmission lines carrying power to your house, there’s a power plant (likely burning coal or, increasingly, natural gas) churning out the electricity that you and everyone else are draining at that moment.

The amount of power in our grid at any one time is carefully maintained — too much or too little and things start to break. Grid operators make careful observations and predictions to determine how much electricity power plants should produce, minute by minute, hour by hour.

But sometimes they’re wrong, and a plant has to power up in a hurry to make up the difference.

Lucky for us, it’s a big, interconnected system, so we rarely notice changes in the quality or quantity of electricity. Imagine the difference between stepping into a bucket of water versus stepping into the ocean. In a small system, any change in the balance between supply and demand is obvious — the bucket overflows.

But because the grid is so big — ocean-like — fluctuations are usually imperceptible. Only when something goes very wrong do we notice, because the lights go out.

Renewable energy is less obedient than a coal- or gas-fired power plant — you can’t just fire up a solar farm if demand spikes suddenly. Solar power peaks during the day, varies as clouds move across the sun, and disappears at night, while wind power is even less predictable.

Too much of that kind of intermittency on the grid could make it more difficult to balance supply and demand, which could lead to more blackouts.

Storing energy is a safety valve. If you could dump extra energy somewhere, then draw from it when supply gets low again, you can power a whole lot more stuff with renewable energy, even when the sun isn’t shining and the wind isn’t blowing.

What’s more, the grid itself becomes more stable and efficient, as batteries would allow communities and regions to manage their own power supply.

Our aging and overtaxed power infrastructure would go a lot further. Instead of installing new transmission lines in places where existing lines are near capacity, you could draw power during off-peak times and stash it in batteries until you need it.

Just like that, the bucket can behave a lot more like the ocean. That would mean — at least in theory — more distributed power generation and storage, more renewables, and less reliance on giant fossil-fueled power plants.

So that’s why this battery thing is kind of A Big Deal.

Heating up

“A battery will do for the electricity supply chain what refrigeration did to our food supply chain,” Sadoway says from his office in MIT, a good deal more spacious than the battery lab.


Those canisters he showed me were early prototypes of cells for a “liquid metal battery” he started researching a decade ago.

“I started working on batteries just because I was crazy about cars,” Sadoway tells me. (His desktop background is a 1961 Studebaker Avanti he sold a few years ago. He keeps the picture around the way one would memorialize a family pet.)

In 1995, he took a test drive in an early Ford electric vehicle and fell in love. “I realized the only reason we don’t have electric cars is because we don’t have batteries.”

So Sadoway started thinking. He had some experience with the process of refining aluminum, and he wondered if that could be a model for a new, unorthodox kind of battery. Aluminum smelting is a dirt-cheap, energy-intensive process by which purified metal is boiled out of ore.

But if that one-way process could be doubled up and looped back on itself, maybe the huge amount of energy fed into the molten metal could be stored there.

In some ways, that’s insane — the molten battery would have to run around of 880 degrees F, only slightly cooler than the combustion chamber of a car engine.

But it’s also a bizarrely simple concept, at least to an electrochemist. It turns out assembling a cell of a liquid metal battery cell is as easy as dropping a plug of metal, made up of two alloys of different densities, into a vessel and pouring some salt on top.

When the cell is powered up, the two metals melt and divide into two layers automatically, like salad oil floating on vinegar. The molten salt forms a layer between them, conducting electrons back and forth.

But even with a promising start, developing a new battery is a glacially slow process, Sadoway says. Early funding from ARPA-E and the French oil giant Total helped him get the idea off the ground, but sustaining research for the years needed to build any brand new technology is expensive.

Venture capitalists are shy about drawn-out engineering projects when there are so many software startups promising fast profits.

“In any capital-intensive industry, industry will stand in the way of innovation,” Sadoway says. Existing battery companies have too much invested in the status quo to be much help, he says. Lithium-ion came from outside the established battery industry of its time, he points out; the next battery will have to do the same.

The molten metal battery has long since moved out of the basement lab. In 2010, Sadoway started the battery company Ambri with several of his former students, then moved HQ into a manufacturing facility 30 miles west of Cambridge to the town of Marlborough.

Now, Ambri employs about 40 people and is busy building prototype battery packs out of hundreds of the molten metal cells.

Sadoway says Ambri is less than a year away from deploying its first commercial models. All signs have been hopeful so far, he says. At the manufacturing facility, some test cells have been up and running for almost four years without showing any signs of wear and tear.

Getting the assembled battery packs, each consisting of 432 individual cells, to work was trickier. But after ironing out some pesky issues with the heat seals, the battery packs can reach a self-sustaining operating temperature, hot enough to charge and discharge without any extra energy input.

Now Ambri is in the middle of raising another round of funding, enough to reach market-ready production mode.

On my way out the door, I say that, for all the difficulty and delay, it seems like this battery could really be close. “I hope so,” Sadoway says, looking almost wistful. “Maybe this is it. I’d like to see that.”

A crowded field

The molten metal battery isn’t the only moonshot battery. It’s not even the obvious front-runner. Other technologies are pushing ahead, quietly and without fanfare, from “iron flow batteries” to zinc- and lithium-air varieties.

Like Sadoway’s project, many of these untested technologies are funded initially by grants from ARPA-E. “These are very early stage, high-risk technologies,” says Rohlfing, the agency’s deputy director. “We take a lot of shots on goal.”

One especially promising contender in the better battery battle is the Pittsburgh-based company Aquion, whose founder, Carnegie Mellon professor Jay Whitacre, set out in 2008 to design the cheapest, most reliable battery you could make.

The result is something colloquially called a “saltwater battery.” It looks, more or less, like a Rubbermaid bin full of seawater. All of the materials in the Aquion batteries are abundant and easily obtained elements, from salt to stainless steel to cotton. What’s more, none of those materials carry the risks of a lithium-ion battery.

“Our chemistry is very simple,” says Matt Maroon, Aquion’s vice president of product management. “There’s nothing in our battery that is flammable, toxic, or caustic.”


Image above: Battery storage array. From original article.

It’s also stupidly easy to assemble. “Our main piece of manufacturing assembly equipment comes out of the food packaging industry,” Maroon says. “It’s a simple pick-and-place robot that you’d find at Nabisco, putting crackers inside of blister packs.”

Aquion batteries have been on the market for nearly three years, installed in both homes and utility-scale facilities.

Overall, Aquion has 35 megawatt hours of storage deployed around the world in 250 different installations. One in Hawaii has been up and running for two years; last year, the battery-plus-solar system powered several buildings for six months without ever falling back on a diesel generator.

“We need to get more of these things out into the field,” says Rohlfing. “Right now, if I’m a utility or a grid operator and I want to buy storage, I want to buy something that comes with a 20-year warranty. The technologies we’re talking about aren’t at that stage yet.”

But they’re getting close. Another ARPA-E-funded project, Energy Storage Systems, or ESS, announced last November that it would install one of its iron-flow batteries as part of an Army Corps of Engineers microgrid experiment on a military base in Missouri.

ESS has also installed batteries to help power an off-grid organic winery in Napa Valley — for that matter, so has Aquion. As more and more of these one-off experiments prove successful — and more of these new kinds of batteries prove their worth — the possibility of a battery-powered energy system comes a little closer.

But will batteries ever be, well, cool? That’s a harder question. Aquion’s Matt Maroon has been working in the field since 2002, soon after he left college. At conferences, Maroon was often the youngest person in the room by 30 years. He was sure he wouldn’t be “a battery guy” for his whole career.

Fifteen years later, he’s still a battery guy — but he’s no longer the youngest person in the room.

More students are starting to get involved with batteries, and people are starting to take notice. “It’s still not as a cool as working at Apple,” he says. “But I think people recognize its importance and that kind of makes it cool.”

“Or I hope so,” he laughs. “I’ve got a 9-year-old daughter. So I’d like to work on something that she thinks is cool someday. That’s my ultimate goal.”




Keep the lights on in England?

SUBHEAD: In the UK’s scramble to “keep the lights on”, the new government should listen to its favorite newspaper.

By Jeremy Leggett on 11 September 2016 for JeremyLeggett.net -
(http://www.jeremyleggett.net/2016/09/in-the-chaotic-scramble-to-keep-the-lights-on-the-new-government-should-listen-to-its-favourite-newspaper/)


Image above: Theresa May, the new Prime Minister, at 10 Downing Street with her husband Wallace Gromit. From (http://www.rechargenews.com/solar/1443571/opinion-uks-government-should-listen-to-its-favourite-media).

Given that energy is the essential bedrock of a healthy economy, it is both frustrating and bewildering to watch a protracted national debate like the one accompanying the Brexit referendum and its aftermath and see how little time and attention is allotted to energy policy. In the run up to the referendum, I saw hardly any coverage of two towering themes that will be familiar to all with an interest in energy these days.

The first is the speed with which a clean energy insurgency is invading energy markets around the world. The second is the speed with which the energy incumbency is unraveling, both in the face of the invasion, and a wider array of old-age problems.

Both themes could hardly be more significant for the UK economy, for two particular reasons. The longer we continue to flog the dead and dying horses of the incumbency, the more our economy will miss out on the fruits of clean energy.

And crucial to the Brexit outcome, the more we distance ourselves from pan-European markets and policy  making, the more expensive clean energy is likely to be, and the more difficult it will be to access at scale.

A related question is how we keep the lights on, given how many British power plants are nearing retirement. Whenever this issue is discussed, the chaotic state of UK energy policy quickly becomes apparent.

Among the legions of British media actors happy mostly to ignore energy, and its handmaiden climate policy, there are thankfully exceptions. On August 10th, readers of the Conservative party’s newspaper of choice, the Telegraph, will have read the kind of headline more normally associated with Greenpeace magazine: “Holy Grail of energy policy in sight as battery technology smashes the old order.”

 In the article, international business editor Ambrose Evans-Pritchard presented such compelling evidence for the soaring prospects both of storage and renewable power that it must have left more than a few of his readers shaking their heads in wonder that so many of their fellow Conservatives can remain wedded to the receding prospects of new nuclear power and shale gas in the UK.

“This country can achieve total self-sufficiency in power at viable cost from our own sun, wind, and waters within a generation,” Evans-Pritchard wrote. “Once we shift to electric vehicles as well, we will no longer need to import much oil either. Rejoice.”

All this year I have kept a monthly blog summarising progress in energy and other fields related to climate change. This series of eight articles captures both the two themes I write of here – disruption by the insurgency and implosion of the incumbency – telling what is essential a tale of global business system-change unfolding before our eyes.

Consider for example the economic challenges facing those Conservatives who remain hopeful of drilling their way to shale riches and building new nuclear, meanwhile suppressing the kind of clean-energy prizes described so well in their favourite newspaper.

The shale industry they seek to emulate and import is in large measure going bankrupt because of something we hardly ever hear about in the UK media: the oil and gas industry has been drilling for years at a cost of recovery in excess of the cost for which they can sell their hydrocarbons.

As chickens come home to roost in this junk-debt feast, 90 US shale drillers have already filed for bankruptcy. Many others will follow, because banks have started to call in loans.

The drillers have innovated to cut their costs, but still they are mostly unprofitable, and will remain so as long as the oil price stays low. If it rises, and moves above $90, growing numbers of consumers will be unable to afford oil and gas, and clean energy will will look even more attractive.

Do Mrs May and her troops think the economics of shale are going to be any different this side of the Atlantic? They are very likely to be worse, even if gas proves extractable in commercial quantities from Britain’s shale, which is more geologically complex than its American equivalent.

The reason for this is that the UK government has insisted that environmental regulation will be tougher here than in the USA, which for much of the shale boom has operated with the kind of rulebook a developing country might be ashamed of. (That has been changing fast this year, adding to the dismal unprofitability of most US shale gas).

As for Hinkley Point, I covered the monstrous economics of that in my June column. Since then, the plight of EDF has worsened. Another conservative organ covered this well in August. “Hinkley Pointless”, read the Economist’s headline.

The article points out that the National Audit Office has verified figures showing that solar and wind are cheaper than nuclear today, never mind in the mid 2020s when the power plant might eventually come on stream, in the vanishingly improbable event that EDF can correct their ghastly catalogue of operational disasters in the interim.

“Britain should cancel its nuclear white elephant and spend the billions on making renewables work,” the Economist announced.

Yes, but let us not forget energy demand management. In this, the quickest, cheapest, and most important route to keeping the lights on, the UK energy scene is just as chaotic as generation is. But that is another story.

A slightly extended version of my column this month in Recharge Magazine:

.

Bad Energy in Hawaii

SUBHEAD: Hawaii Public Utility Commission reality check in post HECO-NextEra merger environment.

By Henry Curtis on 26 May 2016 for Ililani Medoa -
(http://www.ililani.media/2016/05/puc-reality-check-post-heco-nextera.html)


Image above: Hawaiian Electric Industries President and CEO Connie Lau stands with Jim Robo, CEO of NextEra Energy announcing takeover plan in January. From (http://www.bizjournals.com/pacific/news/2016/01/11/nextera-s-purchase-of-hawaiian-electric-won-t.html).

[IB Publisher's note: The PUC and Hawaii Electric Industries have been pulling the state in the wrong direction for some time. Bringing in cut-throat NextEra energy company and importing Liquid Natural Gas (LNG) from fracked wells in British Colombia and Alberta is not a solution to an energy problem but a boondoggle and risk to the environment of Hawaii.]

Bloomberg News announced on May 24 that NextEra Energy Inc.’s proposed $4.3 billion takeover of Hawaiian Electric Industries Inc. is looking increasingly less likely as the company gets a new chance to buy Oncor Electric unit of Energy Future Holdings Corp, the largest power distributor in Texas.

Hawaiian Electric Industries CEO Connie Lau, HEI Chief Financial Officer James Ajello, and the then NextEra Vice Chairman and CFO Moray Dewhurst offered contradictory statements and testimony regarding the $90-95 million breakup fee that NextEra may pay to HEI if the deal is not approved by June 3, and NextEra were to walk away from the deal.

The money would go to HEI and its shareholders, not HECO and its ratepayers.

The breakup language is an extremely complex document written by lawyers.

The Hawaii Public Utilities Commission was widely expected to issue a decision in the late summer or fall of 2016. PUC staff lawyers, economists and accountants are pouring through the 110,000-page record

With the announcement of the potential breakup, the PUC can suspend their analysis for a few weeks to see if the breakup really happens.

During the next few weeks the PUC can put greater effort on two major efforts underway:
  • The evaluation of the HECO Companies Power Supply Improvement Plans (PSIPs) which state alternative plans for the utility between now and 2045.
  • PUC's Distributed Energy Resources (DER) Working Group which is seeking to advise the Commission on ways of increasing rooftop solar penetration, while accounting for interconnection standards, safety, reliability, and rate structures.
The Commission can also focus on the HECO dockets opened in the last six months which have yet to really start.

Issue
Docket
HECO`s Utility-Scale Community-Based Renewable Energy Application
2015-0389
A HECO-designed special time-of-use rate structure for the Department of Education
2015-0410
HECO Companies Demand Response Program
2015-0412
An updated Power Purchase Agreement between HECO and the 200MW AES coal-burning facility in Campbell Industrial Park
2016-0007
HELCO purchase of Hamakua Energy Partners generator
2016-0033
HECO`s proposed $736.0 million Smart Grid (which includes ten inter-related and/or independent subcomponents
2016-0087
HECO`s proposal to import largely fracked Liquefied Natural Gas (LNG) from British Columbia at a cost of $459.3 million
2016-0135
HECO`s request for a waiver from Competitive Bidding for a new Kahe generation facility
2016-0136
HECO`s proposed $859.0 million Kahe Power Plant
2016-0137


The PUC “regulates 1625 entities, which includes all chartered, franchised, certificated, and registered public utility companies that provide electricity, gas, telecommunications, private water and sewage, and motor and water carrier transportation services in the State.”

Earlier this month, Sandwich Isles Communications and Pa Makani LLC, dba Sandwich Isles Wireless filed applications with the PUC to renew their Annual Certification as an Eligible Telecommunications Carrier.

For the past two decades the Hawai`i Department of Hawaiian Home Land has given the politically connected Sandwich Isles, the exclusive rights to provide phone service for new customers on Hawaiian Home Lands.

The Federal Communications Commission provided Sandwich Isles, $830 per customer per month from the Universal Service Fund to subsidize phone service.

Earlier the year Federal Judge Susan Oki Mollway gave Sandwich Isles President Albert S.N. Hee a 46-month sentence for providing “false” salaries to family members, college tuition for his children, family vacations, massages and dozens of other personal expenses. Al Hee is the brother of former State Senator Clayton Hee.



HECO to import Canadian LNG


SUBHEAD: research confirms a link between fracking and almost every large induced earthquake in B.C.

By Henry Curtis on 25 May 2016 for Ililani Medoa -
(http://www.ililani.media/2016/05/heco-proposal-to-import-canadian-lng-is.html)


Image above: A LNG tanker ship at port. From (http://www.marinetraffic.com/en/photos/of/ships/shipid:370522/#forward).

Hawaiian Electric Company has signed a Fuel Supply Agreement with Fortis Hawaii Energy Inc., a subsidiary of Fortis Inc., headquartered in Newfoundland, Canada.

The gas would be exported from their facility on Tilsbury Island in British Columbia.

The facility is about twenty miles north of the U.S. Border and twenty miles south of Vancouver. The deal must be approved by the Public Utilities Commission.

Importing LNG would require a vast infrastructure overhaul. HECO asserted they will need to spend $859 million building the new Kahe generator facility and another $459.3 million on the LNG system.

Ronald Cox, HECO`s Vice President for Power Supply, submitted testimony in the LNG application which stated that the importation of LNG has a double condition, requiring approval of both the HECO-NextEra merger and the Kahe combined cycle facility.

HECO asserted that LNG “burns cleaner,” and it is “the lowest cost alternative for compliance with future environmental regulatory requirements.”

Life of the Land became the first group to file a Motion to Intervene in the proceedings. Their 383-page motion detailed the problems from importing gas from British Columbia.

CBC News reported that the British Columbia Oil and Gas Commission confirmed the 4.4-magnitude earthquake in 2014 was "triggered by fluid injection during hydraulic fracturing," making it one of world's largest earthquakes ever triggered by the controversial fracking process."

Canadian Earthquakes are different from American Earthquakes according to a scientific article in the current issue of Seismological Research Letters, published by the Seismological Society of America.
“In the central United States, most induced seismicity is linked to deep disposal of coproduced wastewater from oil and gas extraction.

In contrast, in western Canada most recent cases of induced seismicity are highly correlated in time and space with hydraulic fracturing, during which fluids are injected under high pressure during well completion to induce localized fracturing of rock.

Furthermore, it appears that the maximum-observed magnitude of events associated with hydraulic fracturing may exceed the predictions of an often-cited relationship between the volume of injected fluid and the maximum expected magnitude.”

Canada’s #1 national newspaper, the Globe and Mail, reported that the report “looked at 12,289 fracking wells and 1,236 waste-water wells in an area along the B.C.-Alberta border.” The regulating agency responded, “the BC Oil and Gas Commission says the research does not raise any safety concerns.”

"There's bad news and good news when it comes to fracking and earthquakes in Western Canada, according to new research from a paper co-authored by a Geological Survey of Canada scientist,: according to CNC News.

"The new research confirms a definitive link between hydraulic fracturing and almost every large induced earthquake recorded in B.C. and Alberta's oil and gas patches since 1985.

In other words, scientists now have evidence that 90 per cent of seismic events over magnitude 3.0 that shook the region were triggered by crews fracking for oil and gas underground."

The Council of Canadian Academies published “Environmental Impacts of Shale Gas Extraction in Canada: The Expert Panel on Harnessing Science and Technology to Understand the Environmental Impacts of Shale Gas Extraction.”

The report was misrepresented in HECO`s application which basically asserted that the analysis found no problem. Actually the 292-page report found a lack of data and analysis.

The report noted that Canada is “the world’s third-largest natural gas producer, fourth-largest exporter, and possessing vast shale gas resources of its own, Canada has a major stake in this new source of energy."

“The Council of Canadian Academies was asked by the federal Minister of Environment to assemble an expert panel to assess the state of knowledge about the impacts of shale gas exploration, extraction, and development in Canada.

In response, the Council recruited a multidisciplinary panel of experts from Canada and the United States to conduct an evidence-based and authoritative assessment supported by relevant and credible peer reviewed research.

As with all Council panels, members were selected for their experience and knowledge, not to represent any particular stakeholder group. The report does not include recommendations, since policy prescription falls outside the Council’s mandate.”

The Report detailed the nature of the shale deposits and the problems that exist.

"The rapid expansion of shale gas development in Canada over the past decade has occurred without a corresponding investment in monitoring and research addressing the impacts on the environment, public health, and communities."

"The primary concerns are the degradation of the quality of groundwater and surface water (including the safe disposal of large volumes of wastewater); the risk of increased greenhouse gas (GHG) emissions (including fugitive methane emissions during and after production), thus exacerbating anthropogenic climate change; disruptive effects on communities and land; and adverse effects on human health.

Other concerns include the local release of air contaminants and the potential for triggering small- to moderate-sized earthquakes in seismically active areas."

"These concerns will vary by region. The shale gas regions of Canada can be found near urban areas in the south and in remote regions in the northwest, presenting a large diversity in their geology, hydrology, land uses, and population density."

"The phrase environmental impacts from shale gas development masks many regional differences that are essential to understanding these impacts.”

The Pembina Institute was formed following the 1981 Lodgepole sour gas accident in Alberta, which killed two people and polluted the air for weeks. A small group of rural Albertans came together to secure tougher regulations for drilling sour gas wells, and later went on to form the Pembina Institute.

"We conclude that natural gas has a role to play in a world that avoids 2°C of warming, but that role is unlikely to materialize unless shaped by strong climate change policies in the jurisdictions that produce and consume the gas. Because these policies are not currently in place, claiming that natural gas, and specifically LNG from BC, is a climate solution is inaccurate."

The British Columbia government believes greenhouse gas “targets for 2020 will be extremely difficult to meet.” Therefore, provincial standards have been abandoned and instead future national standards will apply.

Climate Change News reported earlier this year that “British Columbia’s carbon pollution is going up while five other Canadian provinces are bringing their greenhouse gas emissions down.”
The Convention on Wetlands, called the Ramsar Convention, is an intergovernmental treaty that provides the framework for national action and international cooperation for the conservation and wise use of wetlands and their resources.

Among the 2,240 Ramsar Sites located around the world are Kawai Nui and Hamakua Marsh on Windward O`ahu and the lower Fraser River Delta. The Fortis facility at Delta on Tilsbury Island, British Columbia site is wholly within the lower Fraser River Delta Ramsar site. This site will be expanded to handle exports to Hawai`i.

A report by geoscientist David Hughes asserted that it includes “poisoned water wells, containment ponds that leaked their deadly post-fracking contents into rivers killing fish, and municipal wastewater plants damaged by the industry's corrosive wastewater.”

The report notes fracking occurs in “nearly 90 per cent of all new gas wells in B.C.”

.