Getting off the grid

SUBHEAD: It means investments in education, time and money. It will also mean reducing energy consumption.

By Kris De Decker on on 17 May 2016 for Lowtech Magazine -

Image above: Three 10W solar panels on the window sill of the apartment. From original article.

Solar panels have become cheaper and more efficient in recent years, but they are far from a universal solution, even in sunny regions. One reason is that a typical solar photovoltaic (PV) installation is still beyond the budget of many people.

The average pricing for a 5kW residential PV system completed in 2014 varied from $11,000 in Germany to $16,450 in the USA. [1, 2] Roughly half of that amount concerns the installation costs. [3]

A second obstacle for solar power is that not everybody lives in a single-family dwelling with access to a private roof. Those who reside in apartment buildings have little chance of harvesting solar power with a conventional roof-mounted system.

Furthermore, in apartment buildings, the roof would quickly become too crowded to cover the electricity use of all residents, a problem that grows larger the more floors there are in a building. Lastly, a typical solar installation is problematic when you're renting a place, whether it's a house or an apartment.

I'm one of those people who runs into every one of these obstacles: I live in a flat, I rent the place, and I don't have the budget for a conventional solar system.

However, I receive a lot of sunshine. My apartment is located near Barcelona in Spain, a city with an average solar insolation of almost 1,700 kWh/m2/year (which is also the average figure across the USA). Furthermore, the 60 m2 apartment has the balcony and all windows facing south-south-west, and there is no shading by trees or other buildings.

These conditions allow me to get through the winter without a heating system, relying only on solar heat and thermal underclothing. Hot water is supplied by a solar boiler, which was installed by the landlord. Clothes are dried on the balcony. While tinkering with solar panels for an art project, I got an idea: with the sun already powering so much of my living space, wouldn't it also be possible to harvest solar power from the window sills and the balcony and take my apartment off the electricity grid? Such a PV installation would solve my problems:
  • I don't need access to the roof.
  • I can install the system myself, which makes it much cheaper.
  • I can take the solar installation with me if I move to another place.
Obviously, the big question is whether or not such an unconventional solar system could generate the necessary electricity. As a first experiment, I decided to power my 10 m2 home office with solar panels placed on the 2.8 m long window ledge that runs along the windows of the office and the adjacent bedroom.

Solar Powered Home Office

The window in my office is quite small (at 1.5 m2, it takes up only half of one wall). However, there's no need for power in the bedroom, which has been lighted by three IKEA SUNNAN lamps for years.

Consequently, the full window ledge is available to power the home office. It offers enough space for five solar panels of 10W each, providing me with 50 watt-peak of solar power. The balcony will serve to power the rest of the apartment, and the plans for that second project are outlined at the end of this article.

With their placement on the window sill, the panels are shaded by the building itself in the morning. They receive direct sunlight from about 10 am to 5 pm in the pit of winter (a total of 7 hours), and from roughly 1 pm to 9 pm in the height of summer (a total of 8 hours). The maximum energy production is thus roughly 400 Wh per day.

Image above: A 12 volt controller and three batteries that they charge. From original article.

The solar panels are connected in parallel and coupled to a solar charge controller and 550 Wh of lead-acid batteries. Assuming a 33% Depth-Of-Discharge (DoD) and a round-trip battery efficiency of 80%, this gives me a maximum energy storage of roughly 150 Wh.

Can you power a home office with 50 watt-peak solar panels and 150 Wh of energy storage?

Now let's look at the energy use of my home office, before it was solar powered. I sit here working most of the days, either researching, writing, or building and repairing stuff. Devices that regularly use electricity are:
  • A laptop, which requires an average 20 watts of power.
  • An external computer screen, which needs 16.5W of power.
  • Two CFL lamps (20W & 12W) and one LED-lamp (3W).
Home Office Power Use
This adds up to 35W of power during the day (with only the laptop and the screen in use) and 70W after sunset (the laptop, the screen, and the lights). I usually work in the mornings and evenings, roughly from 10 am to 2 pm and from 8 pm to 1 am. During the afternoon, I do other stuff or I work in the library.

Total electricity use in my office is thus (on average) 500 Wh per day, with little variation between winter and summer. On cloudy days I also use lights in morning, which can raise energy use to 640 Wh per day. Then there are some devices that occasionaly need power:
  • A laser printer, which uses 4Wh of energy for warming up and printing eight text pages. This corresponds to operating my desk lamp (5W) for more than 45 minutes.
  • A pair of PC loudspeakers (1.5W of power).
  • Three USB bicycle lights (each use 1.4W of power while charging).
  • A digital camera, which uses 3W while charging.
  • A fan, which uses 30-40 watts of power.
  • A mobile phone (a dumb one) that's charged once every few weeks.
Obviously, my solar PV system doesn't produce enough energy to power my home office. While regular electricity use is at least 500 Wh on a 9-hour working day, the window sills give me a maximum of 400 Wh per day. On overcast days, energy production can be as low as 40 to 200 Wh per day, depending on the type of cloud cover. Furthermore, energy storage is only 150 Wh under ideal circumstances, while most energy use (350 Wh) is after sunset.

Image above: The new office desk at the window with computer light and cellphone.

And yet, here I am, typing this article on a solar powered laptop in a room that's lit by solar power. How is this possible? By following these strategies:
  1. Maximize solar power production by tilting the panels according to the season.
  2. Minimize power use by installing a low-voltage DC grid and using DC appliances.
  3. Force yourself to lower energy demand on dark days by going off the grid.
Below, we look at these points in more detail. My solar system has been in operation since November 2015, initially with only two 10W panels. Three more panels were added in early spring.

1. Adjust the Tilt of the Solar Panels

Roof-mounted solar panels usually have a fixed angle in relation to the sun. Because the elevation of the sun varies throughout the year, a fixed angle is always a compromise. Panels that lay horizontal on a flat roof are relatively well positioned for energy production in summer, but much less so for use in winter.

On the other hand, tilted solar panels perform much better in winter but not as well as in summer. On sloped roofs, the angle of the panels is often determined by the angle of the roof, which isn't necessarily the best angle for solar power production.
A PV panel that's optimally tilted towards the winter sun can triple electricity generation compared to a horizontally placed panel.
Adjusting the angle of a solar panel according to the season can increase electricity production significantly in winter. In December, a PV panel in Barcelona that's optimally tilted towards the winter sun can triple electricity generation compared to a horizontally placed panel.

Because the advantage is much smaller in other seasons, the average annual increase in power production is less than 10%. However, tilting the panels is the key to harvesting enough solar power during the winter months, when power shortages are most probable.

In the case of a balcony or window sill solar PV system, adjusting the angle of the solar panels is as simple as watering the plants. Although you could make small adjustments every hour, day or month, adapting the angle two or four times per year is as far as you should go.

There's another advantage to having the solar panels so close at hand: they can be cleaned regularly. Roof-mounted solar panels rarely get cleaned because the roof usually isn't very accessible. Losses due to dust and dirt are assumed to be 1% of generated energy, but in dry and dusty regions, as well as in traffic-heavy areas, they can be as high as 4-6% if washing is not undertaken on a regular basis. [4]
Adjusting the angle of a window sill solar panel is as simple as watering the plants
Obviously, it's crucial that the panels don't fall off the window ledge, no matter what happens. Window sills differ in shapes and sizes, which calls for a custom-made supporting structure. I have a fixed metal bar at my window sill, aimed at protecting plant containers, which allows me to securely lock the solar panels in place.

I guess I'm lucky to have this, but it also shows how small design changes can make a big difference. As an additional safety measure, I loaded the wooden base of each panel with some heavy rocks.

Adding a mechanism to vary the tilt of the panels complicates the design, because the moving part has to be just as sturdy as the base. Following some failed attempts, I found a mechanism that seems to work, using vintage Meccano rods (2-3 layers thick and with larger nuts and bolts).

One rod is connected to the base of the structure, while another is connected to the wooden board that carries the panel. Both rods are connected to each other in the middle. Loosening this connection allows me to adjust the length of the supports and thus the angle of the solar panels.

Solar PV Windows?
Some readers might consider my approach soon-to-be-obsolete, because several companies are working on "solar PV windows": glass that doubles as an electricity generator. However, this technology would not perform as well as adjustable solar panels on window sills, for several reasons.

First of all, solar PV windows are most often entirely vertical, which is never an efficient angle to generate solar power -- their power generation is about 3 times lower than horizontal panels. [5] Secondly, in summer it would be impossible to open the windows or lower the shutters, which would quickly overheat my office and introduce a need for air-conditioning.

My solar PV installation, on the other hand, can produce power when the shutters are closed and when the windows are open. Last but not least, a window-integrated solar panel can't be taken with you when you move, while my system is entirely mobile.

2. Opt for a Low-Voltage DC System

Typical solar PV systems convert the direct current (DC) electricity produced by solar panels into alternating current (AC) in order to make it compatible with the AC distribution system in a building. Because many modern appliances operate internally on DC, the AC electricity is then converted back to DC.

The DC/AC-conversion is done by an inverter, which sits between the solar charge controller and the load. The second conversion happens in the (external or internal) AC/DC adapter of the devices that are being used.

The trouble with this double energy conversion is that it generates substantial energy losses. This is especially true in the case of solid-state devices such as LEDs and computers, where the combined losses of the DC/AC/DC conversion amount to roughly 30% -- see our previous article for further detail. Because these are also the devices that make up most of the load in my home office, it makes a lot of sense to avoid these losses by building a low-voltage DC system instead.

Like in a boat or a camper, the 12V DC electricity of my solar panels is used directly by 12V DC appliances, or stored in 12V DC batteries. If my solar panels generate their maximum output of 50W, my devices have 50W available. When battery power is involved, charging and discharging the battery adds 20% of energy loss, which leaves 40W available for the appliances. 

The choice for a low voltage DC system raises energy efficiency by 40%

On the other hand, in a typical solar PV installation where a DC/AC/DC energy conversion takes place, the devices would only have 35W available, and the rest would be lost as heat during energy conversion. If lead-acid battery storage is used in such a system, only 28W of power remains. In short, in my specific case, choosing a DC system multiplies power production by 1.4 times.

The choice for a DC system saves not only energy but also space and costs. Less solar panels are needed and there's no need to buy a DC/AC inverter, which is a costly device that needs to be replaced at least once during the life of a solar system.

 Most importantly, you can build a DC solar power system yourself, even if you're as clumsy as I am. A low-voltage DC grid (up to 24V) is safe to handle because it carries no risk of electric shock. [6] Adding up all costs, I took my home office off the grid for less than 400 euro.

Where to Find DC Appliances

Mounting a DC system implies the use of DC-compatible devices. However, because so many modern appliances operate internally on DC, this doesn't mean that you have to buy everything anew.

To adapt the lighting in my office, I simply cut the mains plugs from the power cords, replaced them with DC-compatible plugs that fit straight into my solar charge controller, and substituted the light bulbs with 12V LED-bulbs. To run the laptop on DC, I replaced the power adapter by a DC-compatible power cord, which is available for use in cars. These power cords can be bought for every laptop model you can imagine.

Image above: A 12 volt LED light with plug configured for standard DC plug socket found in cars and available on my cintroller.

Other devices are harder to adapt because the AC/DC adapter is located in the device itself. For example, I haven't figured out yet how to convert my external computer screen to operate directly on DC power.

Appliances that cannot be converted are usually available in a 12V DC version. Examples are refrigerators, slow cookers, televisions, air compressors, or power tools. These can be more expensive than their AC counterparts, because they are produced in much smaller quantities. DC refrigerators are very expensive because they use vacuum insulation. While this makes sense in a camper or sailboat where space is restricted, it's a needless cost in a common building.

The cigarette lighter receptacle in cars, initially designed to power an electrically heated cigarette lighter, has been the de facto standard DC connector for decades. More recently, it has been joined by another low voltage DC distribution system, the USB connector. USB cables operate on 5V DC and can transfer both data and energy. Many consumer electronics are now powered by them.

Currently, these devices are charged by the USB-port of a laptop or desktop computer, but they could be plugged straight into a solar PV system. While the standard USB-cable carries a maximum power of only 10 watts, the newer USB-PD standard accommodates devices with a power consumption of up to 100 watts.

Overcast Days

The choice for a DC system has lowered power consumption in my home office considerably. My laptop's energy use has decreased by about 20%. Switching to DC-direct LED-lamps has halved power use for lighting from 35 to 16W. Based on the 9-hour working day described earlier, daily energy use of regularly used devices in my home office has come down from 500 to 350 Wh/day. This brings average energy use below energy production on sunny days (400 Wh), which are plentiful where I live.

In reality, the external computer screen and the laser printer are still running on grid power. The 350 Wh of energy use mentioned above includes the hypothetical use of a DC external screen (saving 15% of power compared to the AC version), but not the energy use of the printer.

However, on sunny days, I have a significant surplus of electricity, which suggests that I could also operate the external screen and the printer. Even on partly cloudy days energy is abundant.

However, energy use remains too high during overcast days, when power production is between 40 and 200 Wh per day. Obviously, adding more solar panels and batteries would solve the issue, but that's not the way to go because the solar PV system would become more expensive, less practical, and less sustainable. 

On sunny or partly cloudy days, I have more than enough electricity. On overcast days, I have to reduce energy demand.

To guarantee a daily 350 Wh of electricity during three consecutive heavy overcast days in December (a worst case scenario of only 40 Wh energy production per day), I would need to increase solar power capacity fourfold, from 50 to 200W peak capacity, and provide at least five times more batteries.

Although it would be possible to install 200W on the window sills, in that case the solar panels would stop solar light and heat from entering the rooms, which would be counterproductive. Furthermore, I would produce way too much electricity for most of the year.

3. Adjust Energy Demand to Meet Available Supply

There's another option to make the numbers match if there's not enough sun available, and that's using less energy. Suggesting a reduction in energy use is rather controversial, but there are a surprisingly large number of ways to reduce energy use, without having to revert to a typewriter and candles. Here are some possibilities for my home office:
  • I could install a second working desk right next to the window. This eliminates the need for artificial lighting on dark winter days, which saves me at least another 40 Wh on days that electricity production is at its lowest.
  • I could use less lights in evening during low solar power days. For most of the year, I have sufficient energy available to use all the lights in the room. However, most of the days I get by with only two lamps, and if necessary I could use a single 5W or even 3W lamp. When solar production is at its lowest, the latter still gives me more than 13 hours of light. I will never have to spend a night in the dark.
  • I could shift loads towards sunny afternoons. Even in winter, the batteries can already be fully charged by around 2 or 3 pm on sunny days. Adding extra load to the system during these periods takes advantage of solar energy that would otherwise get wasted. This is when I can charge the bicycle lights, the digital camera or the phone, or when I can use the 12V soldering iron (my only power tool) or the printer. In summer I can use the surplus of energy to power two small USB-fans, and of course that's the time when I need the fans the most.
There are a surprisingly large number of ways to reduce energy use, without having to revert to a typewriter and candles
  • I could change my working schedule. If I could manage to work from 9 am to 6 pm instead of in morning and evening, I obtain a double energy savings. I would need no more lighting, except for one hour or so in winter (which saves 70 to 80 Wh/day). Secondly, I would use more electricity while it's being generated, avoiding 20% battery charging and discharging losses while operating the laptop at night and in mornings (which saves another 30Wh). Changing my working schedule would lower daily electricity use to roughly 125Wh, less than half of maximum power production. Furthermore, all battery capacity would be available for overcast days, because there is no energy use at night.
  • I could adapt computer work to solar conditions. There's a remarkable difference in power use for the laptop between writing (roughly 15W) and surfing the web (roughly 25W). In other words, I can work almost twice as long when I'm writing, which I could do whenever available energy is low.
  • I could ditch my external computer screen. It can be very handy for some work, giving both a screen to read and a screen to write, but most of the time it's just wasting energy without being very useful. Ditching the external screen would save me another 150 Wh per day. However, it would probably increase the use of the printer, so it remains to be seen if this option really saves energy.
  • During consecutive, heavy overcast days, I could revert to more drastic measures, like working in the library or not working at all. Or, I could do work that doesn't involve any energy use during the day, such as reading books and taking notes by hand. This would bring extra advantages; it can be refreshing to disconnect and concentrate on something in the old-fashioned way. Going out one evening is a fun and easy way to keep the power level high enough during periods of bad weather.
  • I could build a pedal powered generator for when I really need more electricity during overcast days. Strictly speaking, this is not a reduction of energy demand, but of course it implies an effort from my side. Pedalling for 1 to 1.5 hours would generate roughly 100 Wh of electricity, which would allow me to work on the computer for 3 to 5 hours, or to operate the 5W LED-light throughout the night.
 By keeping an eye on my barometer and being a bit flexible, it's not that hard to plan work according to the weather. However, until now I managed to take advantage of these opportunities mostly when it comes to lighting, and less so when using the laptop. This has nothing to do with computer use being less flexible than lighting. Rather, it's a consequence of how the system is built.

This became clear due to the rather clumsy way that I set up my experiment. Obviously, I wanted to test the installation in the depth of winter before writing about it.

However, I only had two solar panels at the time. Therefore, I first tested my solar powered home office by running the laptop on solar energy for two weeks (while running the lights on grid power), followed by a two-week test of running the lights on solar energy (and the computer on grid power).
For lighting, it's impossible to fall back on grid power because I had to cut the power cords of all lamps to make them compatible with the 12V DC grid
The results were remarkably different for both periods. With the laptop, I could always fall back on grid power by simply switching the power cord. Consequently, there were no external factors that forced me to change my way of working in order to remain within the limits of the energy budget on a dark day. For lighting, however, it was impossible to fall back on grid power.

I had to cut the power cords of all lamps to make them compatible with the 12V DC grid, which meant that I could not run them on AC grid power anymore.

During low power periods, I had no other choice than to lower energy demand for lighting, and that's exactly what I did, quite effortlessly I must say. I quickly made an extra desk at the window to avoid using artificial lights in morning, I switched the lights off whenever I left the room, and I worked with just a 5W or even a 3W light bulb if necessary.

Five months later, I have become totally accustomed to adjusting light levels to available solar power. On the other hand, I keep plugging my laptop into the grid if energy runs low. Why? Because I can. [7]

Consequently, going off-grid seems to be the key to lowering energy demand considerably. [8] Having a limited energy supply also encourages the use of more energy efficient technology. For example, the energy savings I made by replacing the two remaining CFL lamps by LEDs could also have been achieved without building a solar PV system. However, the option only occurred to me after I took up the challenge of powering the office with solar energy.

Progress in energy efficient technology will steadily increase the possibilities of my off-grid system, with no risks of rebound effects
If I would not be able to fall back on grid power, I would probably also get a more energy efficient laptop. In the future, I could also switch to lithium-ion batteries, which have lower losses than lead-acid batteries. Investing in more energy efficient technology would allow me to run the computer and the lights longer with the same amount of solar panels. With a limited power supply, there's no risk of rebound effects that negate these benefits.

4. Build Multiple Solar PV Systems

As mentioned at the beginning of the article, the solar powered home office is only the first step towards converting the whole apartment to solar power and going totally off-grid. The second project will be the installation of a solar system on the 6-metre long balcony in front of the living room and the (open) kitchen. It will power the lights, the stereo-installation, the Wifi-router, all computer use outside the office, and all kitchen appliances.

This second experiment is much more challenging for two reasons. First, the living room and kitchen will also be used by the second person in this household, which will make it more complicated to manage energy use. Furthermore, although we don't have a toaster, a coffeemaker, or a microwave, the kitchen houses a much used high power appliance: the electric cookstove.

Because it would take too many solar panels and batteries to power the electric cookstove by solar PV panels, the plan is to replace it by non-electric alternatives: one or two solar cookers, a fireless cooker, and a rocket stove for the morning coffee. By using direct solar heat, we can make much more efficient use of the space on the balcony.

Another plan is to build a low-tech food storage system that can store most of the food outside the refrigerator, keeping this energy-intensive appliance as small as possible or eliminating it altogether
The balcony solar PV system will be totally independent of the window sill solar PV
The balcony solar PV system will be totally independent of the window sill solar PV system. There are several advantages to this approach. As we have seen in the previous article, cable losses are relatively high in a low-voltage DC system. Setting up several independent systems greatly limits cable length (and cable clutter).

Secondly, installing separate systems allows total power use to surpass 150 watts -- which is the safety limit for a 12V DC system. Thirdly, multiple systems make it possible to start small and gradually expand the system. This avoids large upfront costs and allows you to learn from your mistakes.

Learning from your Mistakes

In fact, it was one such mistake that made me decide to install two separate systems even in my relatively small 10 m2 home office. The two solar panels in front of the office are connected to half of the batteries (powering the lights), while the three solar panels in front of the bedroom are connected to the other half (powering the laptop).

This is because I short-circuited my first solar charge controller and had to buy a second one while the first one was being repaired. It was that or go without lights for three weeks. Thus, a final advantage of multiple systems is increased reliability: if one system fails, there is still electricity.

If the second experiment succeeds, and of course this remains to be seen, the plan is to stop the contract with our power provider, which is to be renewed in December. Obviously, it would be handy to keep a connection to the grid, but there are two important reasons not to do this. The first has been outlined above: going off-grid unleashes the creativity and willingness to lower energy demand.

Secondly, installing a solar system and holding on to a grid connection is financially disadvantageous. At least here in Spain, more than two-thirds of the electricity bill consists of fixed costs. Even if we would use much less grid electricity because of the solar system, our bill would remain more or less the same.
If the second experiment succeeds, and of course this remains to be seen, the plan is to stop the contract with our power provider
Some important challenges remain, most notably the washing machine, the bathroom and the laser printer. The problem with washing machine and bathroom is that they're on the north side of the building, far from the solar panels. We could go to a laundromat but there are none in town. A pedal powered washing machine requires space that we don't have.

The laser printer could be operated with an inverter, which can also be handy to power any other occasional device that doesn't run on 12V DC power. However, a relatively large and expensive inverter would be needed, because the startup power of the machine is above 400 watts. Luckily, I found that out before I fried another costly device.

5. Before You Start

There are some things to keep in mind before you decide to install a low-tech solar PV system:
  • You need enough sun. Solar panels on balconies and window ledges won't work everywhere. A similar system like mine, but 1,000 km further up north, would produce on average only half the electricity, with a much larger difference between winter and summer.
  • You need the right exposure. Even if you're in a sunny climate, don't think of harvesting solar power if windows or balconies are oriented towards the north, the northwest, or the northeast. Shading by other buildings or trees can also smother your ambitions. You need at least 4 hours of direct sunshine on the panels each day.
  • You need to be prepared to lower your energy use. Few apartment dwellers will have enough space available to generate sufficient solar power for an energy-intensive lifestyle.
  • It may be impossible to close some windows completely. The cables from the panels enter my apartment by slightly opening the sliding window of the office. In winter, I cover this gap with cork. I don't use heating so no energy gets lost, but this might be problematic in other circumstances. You probably shouldn't drill a hole through the window or the wall if you are renting the place.
  • Converting your apartment to solar power doesn't make you "100% sustainable". Fossil fuels are used to produce solar panels and batteries. The electricity I generate is likely more CO2-intensive per kWh than Spanish grid electricity, especially since my panels and batteries are manufactured in China. The only reason why my system is more sustainable than using grid electricity is because it forces me to lower electricity use considerably.

Notes & Sources:
[1] Renewable Power Generation Costs in 2014 (PDF), International Renewable Energy Agency (IRENA), January 2015

[2] Photovoltaic System Pricing Trends: Historical, Recent, and Near-Term Projections (PDF), 2014 Edition, SunShot, U.S. Departmennt of Energy, September 2014

[3] Soft costs account for most of PV residential installation costs, PV Magazine, December 2013
[4] Spain's Photovoltaic Revolution: The Energy Return on Investment (SpringerBriefs in Energy), Pedro A. Prieto & Charles A. Hall, 2013

[5] Power Density: A Key to Understanding Energy Sources and Uses (MIT Press), Vaclav Smil, 2015

[6] Provided that total power use is below 100-150 watts (which corresponds to between 8 and 12 ampère for a 12V system). Also make sure to properly fuse your solar PV system to avoid electric fires.

[7] Laptop use is further complicated by the laptop battery. If the battery is not 100% charged, the computer will automatically try to charge it when you connect it to the solar system. However, power use of the laptop triples during charging, and unless there is full sun on the panels my system refuses to provide this amount of power. I "solved" this by keeping the battery 100% charged.

[8] There is interesting academic research about the relationship between energy infrastructures and energy demand, which we will discuss in a forthcoming article.

[9] Note that most energy use of a laptop is in the manufacturing. Switching to a more energy-efficient laptop isn't always a sustainable choice. Buying a second-hand device could be a solution.

Real EROEI for photovoltaic

By Ugo Bardi on 23 May 2016 for Cassandra's Legacy -

Image above: Array of PV panels erected in 1984 and functional for over thirty years with about 10% loss of efficiency. From original article.

Some time ago, a colleague of mine told me the story of when he had been in charge of the installation of one of the first photovoltaic plants in Italy, in 1984 (shown in the figure, on the right). He told me that, shortly after the installation, a high-ranking politician came to visit the plant. As a demonstration, my colleague connected the plant output to an electric heater, lighting up the internal heating elements.

The politician refused to believe that the heater was being powered by the PV plant. "There has to be a trick," he said, "this is not possible. It must be a scam." My colleague tried to describe to him how PV cells work, but imagine trying to explain quantum mechanics to a politician! Apparently, he left still unconvinced.

More than 30 years have passed from the installation of that old plant, but the general attitude about photovoltaic energy doesn't seem to have changed a lot. Not that people think that photovoltaic is a scientific hoax in the same league as the many proposals about such things as "free energy" or "cold fusion" (or maybe yes).

But it seems that many people just can't believe that those small blue things can produce energy in any significant amount. Come on: in order to produce energy you need an engine, a boiler, a smokestack, a turbine, something like that.....

Indeed, most of the current discussions on photovoltaic energy seem to turn around one or another kind of legend. The most recent one seems to be that photovoltaics has a low energy return (EROI or EROEI), sometimes said to be even smaller than one. If it were true, it would mean that photovoltaic plants are not producing energy, they are just consuming it!

But it is not true. It is just one more example of confirmation bias: cherry-picking the data that confirm one's pre-conceived ideas.

It is true that you can find a few studies (very few) that look serious (perhaps) and that maintain that PV has a low EROI. However, in a recent study, Bhandari et al. (1)⁠ surveyed 231 articles on photovoltaic technologies, finding that, under average Southern European irradiation, the mean EROI of the most common PV technology (polycrystalline Si) was about 11-12.

Other technologies (e.g. CdTe) were found to have even better EROIs. Maybe these values are still lower than those of some fossil fuels, but surely not much lower (if they are lower) and a far cry from the legend of the "EROI smaller than one" that's making the rounds on the Web.

Then, if you are worried about another common legend, the one that says that PV cells degrade rapidly, think that those of the plant described at the beginning of this article were found to be still working after 30 years of operation, having lost just about 10% of their initial efficiency!

In addition, consider that the most common kind of cells use only common elements of the earth's crust: silicon and aluminum (and a little silver, but that's not essential). What can you ask more from a technology that's efficient, sustainable, and long lasting?

All that doesn't mean that a world powered by renewable energy will come for free. On the contrary, it will take a very large financial effort if we want to create it before it is too late to avoid a climate disaster (quantitative calculations here). But a better world is possible if we really want it.


No comments :

Post a Comment